Instructions 1) Insert the rubber side of the Wrench-N-Ride expansion plugs into the holes in the deck of your ATV rack. 2) Tighten the nut on the topside of the L-Bracket until the rubber expands inside the hole of the rack. 3) After both L-Brackets are firmly secured on the composite rack place the Auger Carrier against the uprights of the L-Brackets. 4) Once placed against the uprights of the L-Brackets, mark the holes onto the carrier to be drilled. 5) Remove the Auger Carrier and drill the marked holes with a 1/4” drill bit. 6) After drilling the two holes, place the Auger Carrier against the upright angles and bolt both together with supplied bolts and lock nuts.
